Saving A Rhythm Arrange - Roland VS-2000 Owner's Manual

4. Press F1 (Assign), for "Switch Assign"—the RHYTHM ARRANGE EDIT BUTTON
5. For each TRACK/STATUS button shown in the left-hand column, select a pattern
If you want a pattern to play at one length in part of the project and at a different length
in another, assign the pattern to two different TRACK/STATUS buttons, with each
button playing the pattern at the desired length.
6. When you're done, press F6 (EXIT) to return to the RHYTHM ARRANGE EDIT
7. Set MEASURE to the first measure at which you want to enter a pattern.
8. When you are creating Rhythm Arrange pressing TRACK/STATUS button, the
9. Press the desired pattern's TRACK/STATUS button.
10. If there is a rhythm pattern at current position and you are attempting to add new
11. Repeat Steps 7 and 9 to complete the rhythm arrange.

Saving a Rhythm Arrange

To preserve a rhythm arrange you've created or edited, you must save it. Here's how:
1. When you're ready to save a rhythm arrange, navigate to the RHYTHM ARRANGE
2. Press F5 (SAVE)—the RHYTHM ARRANGE SAVE screen appears.
3. Select the type of rhythm arrange you want to save by setting the Group parameter:
Roland VS-2000 Owner's Manual
ASSIGN screen opens.
and the length of measures for which you want it to play.
screen.
current position specified at "MEASURE" moves for length specified at "Len" in
RHYTHM ARRANGE BUTTON ASSIGN screen.
rhythm pattern at current position, the existing Rhythm Pattern will slide for the
length of newly added Rhythm Pattern. The current position will move for the
length of newly added Rhythm Pattern accordingly.
EDIT screen if you're not already there (Page 315).
USER or PROJECT. (See Page 306 if you're not clear on the difference between
these two groups.)
24—Using the Rhythm Track
www.RolandUS.com 311