Changing The Tempo Of The Rhythm Pattern; Saving A Rhythm Group - Roland HP508 Owner's Manual

About the RHYTHM PATTERN screen
1
2
3
4
No . Explanation
1
Rhythm group, rhythm group number, rhythm group name
2 Drum kit type, bank, number, and name
3 PATTERN KEY TRIGGER settings
4
Rhythm pattern, number, name
5 Tempo and current position of the rhythm pattern
Changing the Tempo of the Rhythm
Pattern
Here's how to change the tempo of the rhythm pattern.
1.
Turn the [TEMPO] knob .
MEMO
• You can set the tempo in a range of 5–300. You can use the
[TEMPO]
knob to set the tempo in a range of 60–240.
• You can set the tempo by pressing the
desired interval (Tap Tempo). Press the button at least three
times at quarter-note intervals of the desired tempo.
• [TAP]
When you press the
In this state, you can hold down the
dial to adjust the value below the decimal point. If you press the
[6] (Click)
button, a click is sounded at the specified tempo. The
click turns on/off each time you press the button.
5
[TAP] button at the
button, the Tempo window appears.
[SHIFT] button and turn the
Performing with Rhythm Patterns

Saving a Rhythm Group

A rhythm group you've edited is temporary; it disappears if you turn
off the power or select a different rhythm group.
If you want to keep the rhythm group you've edited, save it to the
user group in the FA.
NOTE
When you execute the Save operation, the data previously in the
save-destination is overwritten.
1.
In the RHYTHM PATTERN screen, hold down the
button and press the [7] (Write)
2.
Move the cursor to the save-destination, and use the dial
[DEC] [INC]
or the buttons to select the save-destination .
3.
Press the [2] (Rename) button and assign a name to the
rhythm group (p . 45) .
4.
Press the [7] (Write) button .
A confirmation message appears.
If you decide to cancel, press the
5.
Press the [6] (OK) button .
The rhythm group is saved.
NOTE
Never turn off the power while data is being saved.
[SHIFT]
button .
[7] (Cancel)
button.
37