About "Store Current?" Messages; Selecting An Item In The Project List; To Display The Projects On A Drive - Roland VS-2000 Owner's Manual

7—Project and Drive Operations
If you encounter error messages when working with your CD-R/RW drive, check
Page 368 or the VS-2000 Appendices to learn what the messages mean.
In the project list, you can also see all of the projects on the currently selected drive. The
VS-2000 provides information about each project.
We'll discuss write-protection, project sample rates and recording modes later on in
this chapter.

Selecting an Item in the Project List

To select a project or drive shown in the project list:
1. Press
When an item is outlined and has an arrow pointing to it from the right, it's selected.

To Display the Projects on a Drive

1. Select the drive. When a drive is selected, the LIST button appears
2. Press LIST—the VS-2000 displays a list of the projects on the drive.
To view the contents of an audio CD, see "The CD Player Feature" on Page 368.

About "Store Current?" Messages

During the course of most PROJECT menu operations, the VS-2000 asks you:
The VS-2000 displays this message when an operation needs to temporarily borrow the
part of the VS-2000's memory that holds the currently loaded project—after the
operation is complete, the VS-2000 re-loads the project from your hard drive. If you've
made any changes to the project since you last stored it, press ENTER/YES in response
to this message to ensure that those changes aren't lost.
If a project is write-protected (Page 104), this message doesn't appear, since the project
is locked to prevent the making of any changes to it.
100
Write-protect status
Name
or or turn the Time/Value dial until the desired item is outlined.
in the screen's lower-right-hand corner.
www.Roland.com
Sample rate Size
Recording mode
Position in project list
Project name
Sample rate and
recording mode
Type of project
Creation date and time
PROJECT menu
Roland VS-2000 Owner's Manual
F6 (LIST)