Operation Display - Roland VS-2000 Owner's Manual

28—UTILITY Menu Parameters
FADER MATCH
When you load a stored project, there's no relation between the position of the 16
physical faders and the stored FADER parameter levels for their corresponding track
channels. The VS-2000 allows you to set the method by which the faders and their
corresponding FADER parameters are brought into agreement. When the FADER
MATCH parameter is set to:
•
•
UNDO MESSAGE
This parameter turns the displaying of the Undo list (Page 72) on or off. If you press
UNDO when the parameter's set to:
•
•
EDIT MESSAGE
When you edit on the VS-2000, you can view messages that allow you to adjust
parameters relating to the edit—see "Edit Messages" on Page 241.
You can turn this parameter on and off in the Edit and Automix Edit Pop-Up menus.
GRID MODE
The setting of the GRID MODE parameter determines how audio regions and phrases
snap to their editing grid. To learn about the grid, see "Snapping to Grid" on Page 247.

OPERATION DISPLAY

DATE/REMAIN Sw
You can replace the clock in the upper right-hand corner of the VS-2000's LCD display
with a readout of how much free space remains on the currently selected drive. When
you set DATE/REMAIN Sw to:
•
•
REMAIN DISPLAY TYPE
When the display is showing the remaining space on the currently selected drive—see
DATE/REMAIN Sw above— REMAIN DISPLAY TYPE sets the manner in which that
information's presented:
•
•
•
•
380
Null—the physical fader takes over control of the FADER parameter's value once
you move the physical fader up or down so that its position corresponds to or
passes by the current FADER setting.
Jump—the FADER parameter value jumps to the setting reflected by the physical
fader's position as soon as you move the physical fader.
Off—the last action is reversed immediately. This setting lets you undo the most
recent action in the fastest way possible.
On—the Undo list appears, allowing to select the desired Undo level.
Date—the VS-2000's calendar/clock is displayed.
Remain—the amount of free space left on the current drive is shown.
Time—shows the remaining recording time based on the current sample rate and
recording mode.
CapaMB—shows the remaining free space in megabytes (MB).
Capa%—shows the free space remaining as a percentage of the original space.
Event—shows the remaining number of free project events.
www.Roland.com Roland VS-2000 Owner's Manual