Moving The Now Line To A Marker; Clearing Markers - Roland VS-2000 Owner's Manual

Digital studio workstation
Hide thumbs Also See for VS-2000:
Table of Contents

Advertisement

Moving the Now Line to a Marker

Using the Locate to Marker Window
You can jump to any marker's position in the project at any time.
1. Hold down SHIFT and press F6—the Locate to Marker
2. Turn the Time/Value dial to place an arrow to the left of the
3. Press ENTER/YES to jump to the marker's location.
4. Press EXIT/NO to close the window.
You can also clear a marker from the Clear Marker window, as described on Page 187.
Using PREVIOUS and NEXT
You can jump from one marker to the next, or back using the PREVIOUS and NEXT
buttons:
You can change the behavior of the PREVIOUS and NEXT buttons so you don't have to
hold SHIFT. As shipped from the factory, they're set to move from phrase to phrase on
the selected track (Page 240). To change the buttons' behavior, switch the PREVIOUS/
NEXT Sw Utility menu parameter (Page 379) to MARKER.

Clearing Markers

In addition to the two methods listed here, you can clear a marker in the UTILITY
menu's Marker screen, described in "Editing Markers" on Page 188.
Clearing a Marker Using PREVIOUS and NEXT
1. Move to the marker you want to clear using PREVIOUS or NEXT (see above).
2. Hold down CLEAR and press TAP.
Clearing a Marker in the Clear Marker Window
1. Hold down SHIFT and press F6—the Locate to Marker
2. Turn the Time/Value dial to place an arrow to the left of the
3. Press CLEAR—the Clear Marker window appears.
4. Turn the Time/Value dial to select another marker if you
5. Press ENTER/YES to clear the selected marker.
6. Press EXIT/NO to leave the Clear Marker window.
7. Press EXIT/NO to close the Locate to Marker window.
Roland VS-2000 Owner's Manual
window appears.
desired marker—ENTER/YES turns on.
Hold down SHIFT and press NEXT—to jump to the next marker in
the project after the now line's current position.
Hold down SHIFT and press PREVIOUS—to jump to the last marker
in the project before the now line's current position.
window appears.
desired marker.
want to.
13—Operating the Hard Disk Recorder
www.RolandUS.com
+
+
187

Advertisement

Table of Contents
loading

Table of Contents