The Dyn Screen - Roland VS-2000 Owner's Manual

11—Input and Track Channel Tools

The DYN Screen

Each VS-2000 input and track channel has its own dynamics processor that can act as a
compressor or expander for the channel's signal.
What is Dynamics Processing?
A dynamics processor—as its name suggests—shapes a signal by responding to
changes in its level. It can help you control extreme fluctuations in volume or
exaggerate them by reducing portions of the signal's level, or "gain."
The Basic Mechanics of Dynamics Processing
All dynamics processors respond to the same fundamental information:
•
•
•
•
The VS-2000 offers you the choice of a compressor or expander on the DYN screen.
What's a Compressor?
A compressor is a device that reduces the difference between the loudest part of a
recording and the softest—what it compresses is the signal's dynamic range. This can
smooth out volume peaks and can make the signal more manageable.
Compression can also add its own sound to a signal, making it seem tighter and more
professional, since compressors are used so widely on commercial recordings.
When a signal's level exceeds the threshold setting, the compressor lowers the signal's
gain—the ratio setting determines by just how much. The attack time sets how quickly
the compressor starts reducing the signal's level after it crosses the threshold, and the
release time determines how long the compressor keeps working before letting the
signal return to its un-processed level.
156
1.
10.
A threshold level setting tells the processor to start working when the channel's
signal is at a particular level.
An attack setting tells the processor how quickly it should respond when the signal
hits the threshold level.
A ratio setting tells the processor how much to change the signal's level.
A release setting tells the processor when to stop changing the signal's level.
www.Roland.com
3. 4. 5.
6. 7. 8.
11.
Roland VS-2000 Owner's Manual
Currently selected
type of dynamics
2.
processor
To learn about
the CH EDIT
DYN screen's
RESET button,
9.
see Page 166.