Move; Trim In - Roland VS-2000 Owner's Manual

MOVE

Use: Mouse, TRACK menu
Phrase MOVE lets you place a selected phrase at a new time location
and/or on another track. You can move it to a currently selected V-Track,
or to a V-Track that isn't currently selected.
The TRACK menu's phrase MOVE operation lets you move phrases to V-Tracks that
aren't currently selected.
Why You'd Use Phrase MOVE
If there's a timing error in a performance, MOVE can shift it into correct musical time.
You can also move a performance from one spot in a project to a more useful location—
for example, if a guitarist plays a great lick at the end of your fadeout, you can move the
lick into the project's intro, or into the solo section in the middle of the project.
Edit Points
•
•
Quantize
Quantize lets you move a phrase exactly to the first beat of a measure when you've set
up a tempo map for your project (see Page 296). Set it to:
•
•
Quantizing works when you're moving a phrase much the way it works when you're
copying multiple phrases, as illustrated on Page 256.

TRIM IN

Use: Mouse, TRACK menu
TRIM IN allows you to adjust the location at which a selected phrase
begins without changing the timing of its audio content.
Why You'd Use Phrase TRIM IN
You can use TRIM IN to make a phrase start exactly where its audio begins by cleaning
off unwanted silence or noise from its beginning. This can make it easier to move or
copy the phrase. Use TRIM IN to clean up the front of your mastering tracks (Page 362).
Edit Points
•
You can also trim the front of a phrase using your mouse—see Page 246.
Roland VS-2000 Owner's Manual
FROM—sets the location of the phrase's time anchor.
TO—sets the time location to which you want to move the time anchor.
Off—so that the phrase is moved to the TO location.
On—so that the phrase is moved to the first beat of the measure in which TO is
currently placed.
TO—sets the desired beginning of the phrase. Any part of the phrase that occurs
before the TO point is trimmed from the phrase.
19—Phrase Editing Operations
www.RolandUS.com
TRACK menu
F2 (MOVE)
TRACK menu
F3 (TrmIn)
257