Using An Ascii Keyboard; Undo And Redo - Roland VS-2000 Owner's Manual

4—Setting Up and Basic Operations
If you're using a mouse, you can also select a new input, track or FX return channel from
any screen on which the currently selected channel's number is displayed as shown here.
To select a new channel:
1. Click the channel number. The Channel Pop-Up menu appears.
2. Move the cursor to the desired channel and click.

Using an ASCII Keyboard

After you've connect an ASCII keyboard to an optional VS20-VGA VGA/Mouse
Expansion Board's PS/2 MOUSE jack, and activated it (Page 66), you can use the
keyboard to perform the following actions.
What You Can Do With an ASCII Keyboard
You can use the keyboard's:
Letter and number keys
Space bar
Arrow keys
SHIFT+arrow keys
Home
F7
SHIFT+F8
Ctrl+S
Ctrl+Alt+Delete
And the keyboard's:
F1-F6
Tab
Enter
Esc
F9
F10
F11
F12

UNDO and REDO

Undo
The Undo function allows you to reverse—or "undo"—track recording and editing
operations. Each project remembers up to 999 of your most recent recording and
editing actions and can restore the project to the state it was in before each action.
72
Input channel Track channel
To:
enter names for projects, tracks, scenes, locators, etc.
start, stop and continue project playback
move the cursor on the VS-2000's display
zoom in and out vertically and horizontally
display the Home screen
display the EZ Routing VIEW screen
display Mastering Room screen
store the current project
shut down the VS-2000
Acts as the VS-2000's:
F1-F6 buttons
the PAGE button
the ENTER/YES button or left mouse button
the EXIT/NO button
the PROJECT MENU button
the TRACK MENU button
the EFFECT MENU button
the UTILITY MENU button
www.Roland.com
FX return channel
Roland VS-2000 Owner's Manual