Saving An Ez Routing Template - Roland VS-2000 Owner's Manual

The Type of Settings a Template Contains
An EZ Routing template remembers everything that pertains to routing and
configuration-related parameters—including input channel, track channel and Aux bus
linking, V-Track selection and the current settings of the hard disk recorder's TRACK/
STATUS buttons.

Saving an EZ Routing Template

1. Set up your VS-2000 as desired.
2. Press EZ ROUTING.
3. If "SAVE" isn't visible above F6, press PAGE until it is.
4. Press F6 (SAVE)—the EZ ROUTING TEMPLATE SAVE screen appears.
5. Turn the Time/Value dial to select the desired user template memory location.
6. Press F1 (NAME) to name the template you're saving. See Page 74 to learn about
7. When you're ready to finish saving the template, press F5 (OK), or press F6 (EXIT)
8. Press ENTER/YES to save the template, or EXIT/NO to cancel the operation.
Roland VS-2000 Owner's Manual
naming. If you'd don't want to name the new template, skip this step.
to cancel the operation.
www.RolandUS.com
22—EZ Routing
281