10-Using The Digital Mixer; Channel Selection; Selecting An Input Channel For Editing; Selecting A Track Channel For Editing - Roland VS-2000 Owner's Manual

10—Using the Digital Mixer
In this chapter, we'll discuss how to perform basic operations on the mixer. For an
introduction to the VS-2000's built-in digital mixer, see Chapter 3.

Channel Selection

As described on Page 52, all of the VS-2000's 40 mixer channels are active and available
at all times. Each of these sets of channels has its own area on the VS-2000.
•
When you want to adjust a channel's parameters, you must first select the channel.
When you select the channel, its CH EDIT parameters are displayed—"CH EDIT" is
short for "Channel Edit."
In addition to the instructions provided below, you can also use a connected mouse to
select any channel from the Channel Pop-Up menu, described on Page 71.

Selecting an Input Channel for Editing

To select any of the input channels and display its CH EDIT parameters (Page 147),
press its round button in the INPUT area.

Selecting a Track Channel for Editing

To select any of the track channels and display its CH EDIT parameters (Page 147):
1. Press the CH EDIT button so it lights.
2. Press the desired track channel's TRACK/STATUS button.
TRACK/STATUS
buttons
Roland VS-2000 Owner's Manual
10 input channels • 18 track channels •
Track Channels
1-18
www.RolandUS.com
6 stereo FX return channels
CH EDIT
button
139