Turning On Locator Safe Mode; Recalling A Locator In Safe Mode; Storing A Locator In Safe Mode; Clearing A Locator In Safe Mode - Roland VS-2000 Owner's Manual

Turning on Locator Safe Mode

1. Hold down SHIFT and press F4.
2. If "SYSTEM" doesn't appear above F1, press PAGE until it does.
3. Press F1 (SYSTEM).
4. The LOCATOR/SCENE TYPE parameter turns Safe mode on or off—see Page 379.

Recalling a Locator in Safe Mode

1. Press LOCATOR•SCENE so it lights green—the
2. Turn the Time/Value dial to highlight the desired
3. Press ENTER/YES to recall the selected locator and

Storing a Locator in Safe Mode

1. Position the now line at the desired location on the
2. Press LOCATOR•SCENE so it lights green—the
3. Turn the Time/Value dial to select the desired unused
4. Press ENTER/YES to store the now line's current

Clearing a Locator in Safe Mode

1. Press LOCATOR•SCENE so it lights green—the
2. Turn the Time/Value dial to select the desired locator.
3. Press CLEAR—"Clear Locator?" appears.
4. Press ENTER/YES to clear the selected locator and
Roland VS-2000 Owner's Manual
Its default value is Quick. To turn on Safe mode, select Safe.
LOCATOR window opens.
locator.
close the window, or just press ENTER/NO twice to
leave the window without recalling a locator.
project.
LOCATOR window appears.
locator slot.
position as a new locator and close the window, or just press EXIT/NO twice to
leave the window without registering the locator.
LOCATOR window appears.
close the window, or just press EXIT/NO three times
to leave the window without clearing the locator.
13—Operating the Hard Disk Recorder
www.RolandUS.com 185