Roland VS-2000 Owner's Manual page 197

4. Turn the Time/Value dial clockwise—as you turn it, a wire appears that connects the
5. Turn the dial in either direction to select the desired destination track.
6. To break the connection between a track channel and a track, repeat Steps 3 and 4,
To clear all track-to-track connections, press PAGE until "ClrTrA" appears above F4,
and then press F4 (ClrTrA).
7. Repeat Steps 3-5 to route other track channels' outputs to the destination track.
Roland VS-2000 Owner's Manual
track channel to one track after another in the Recording Track block.
and turn the Time/Value dial counter-clockwise until no connection exists.
14—Working with Track Channels
We've connected a
combination of mono and
stereo source track channels
to our stereo destination
linked tracks.
Source Tracks 1 and 12 are
mono track channels, and
Track Channels 17 and 18
are linked in stereo.
www.RolandUS.com
We've selected linked
stereo Tracks 9 and
10 as our destination.
197