Harmony Patch Loading; Customizing The Harmony Module; Turning On The Harmony Sequencer; Enabling Midi Control - Roland VS-2000 Owner's Manual

Turning on the Harmony Sequencer

To activate the Harmony sequencer (Page 326), set HARMONY
SEQUENCER to On. Once you've done this, you can select realtime or step
sequencing for capturing the desired Harmony notes. See "Recording in
the Harmony Sequencer" on Page 337.

Enabling MIDI Control

If you'd like to select Harmony notes from a connected MIDI controller—
such as a MIDI keyboard controller—set MIDI to the channel on which
your MIDI controller is transmitting MIDI data. If you don't want to use a
MIDI controller, set MIDI to Off.
"Using a MIDI Controller" on Page 336 explains how to use a MIDI controller with
Harmony.

Harmony Patch Loading

Loading Harmony Patches

1. Navigate to the HARMONY ALGORITHM screen (Page 328).
2. Press F1 (Module.)
3. Press F4 (PATCH) to display the HARMONY MODULE PATCH SELECT screen.
On the HARMONY MODULE PATCH SELECT screen, you can load Harmony patches
using the same technique you'd use to load any effect patch. See "Selecting Effect
Patches" on Page 219 to learn how to load effect patches.

Customizing the Harmony Module

The Harmony module contains two pages of editable parameters with which you can
customize your harmonies' sound and behavior. The:
•
•

Displaying the Harmony Module Parameters

1. Navigate to the HARMONY ALGORITHM screen (Page 328).
2. Press F1 (Module.)
3. To move between part and common parameters, press F1 (> PART) or
Roland VS-2000 Owner's Manual
HARMONY MODULE EDIT COMMON screen—presents the common parameters
that affect all of the harmonies.
HARMONY MODULE EDIT PART screen—presents each part's individual
parameters.
F1 (< COMM).
www.RolandUS.com
25—Harmony
329