Shift Lock - Roland VS-2000 Owner's Manual

You can set the screen saver to:
•
•

SHIFT LOCK

When SHIFT is held down, many of the VS-2000's buttons perform their secondary
function, typically—but not always—printed beneath the button in an outline box. If
you're pressing the SHIFT button frequently, you can lock the SHIFT button on, or arm
it for its next use. Set SHIFT LOCK to:
•
•
•
SWITCHING TIME
This parameter sets the length of time a button must be held down before it performs
its secondary function, allowing you to press such a button quickly when SHIFT is
locked on (see above) without triggering the secondary function. You can select values
between 0.3 and 2.0 sec (seconds).
PREVIOUS/NEXT SW
The PREVIOUS/NEXT Sw parameter, discussed on Page 187, sets the behavior of the
PREVIOUS and NEXT buttons. You can set it to:
•
•
LOCATOR/SCENE TYPE
The LOCATOR/SCENE TYPE parameters activates or de-activates the Safe mode for
selecting locators and scenes, as described on Page 184 and Page 145, respectively.
Rtn TO Tr STATUS Sw
You can set the VS-2000 so that the TRACK/STATUS buttons default to the control of
hard disk recorder tracks—automatically exiting Locator or Scene mode after a locator
or scene, respectively, is selected—as described on Page 143 and on Page 184.
EDIT POINT Sw TYPE
Edit Point Sw Type sets the behavior of the IN, OUT, FROM and TO buttons. See
"Configuring the Behavior of the IN, OUT, FROM and TO Buttons" on Page 238.
Roland VS-2000 Owner's Manual
Off—so it never switches on.
1-30min—to specify the period of inactivity after which the screen saver
automatically turns on.
Off—so the SHIFT button behaves normally, needing to be held down when you
press the button whose behavior it changes.
On—so that each press of the SHIFT button toggles it on or off. When it's on, each
button you press that has a secondary function performs that function.
Once—so that you can press SHIFT to arm it for its next use. Once you've pressed
the next button that has a secondary function, SHIFT turns off.
PHRASE—so that pressing PREVIOUS or NEXT moves the now line to the previous
or next edge, respectively, of a phrase.
MARKER—so that pressing PREVIOUS or NEXT moves the now line to the
previous or next marker, respectively.
28—UTILITY Menu Parameters
www.RolandUS.com 379