Roland VS-2000 Owner's Manual page 264

20—Region Editing Operations
Edit Points
•
•
•
•
Be sure to set the distance between IN and OUT to a length of time greater than .5
seconds. Regions smaller than that will be copied, but won't properly play back.
Times
This parameter sets the number of copies to be pasted, one after another, at the TO
point.
+Insert
The +Insert parameter lets you choose whether you want the copied region to be
pasted over any audio already at the TO location, or inserted before it.
Set it to:
•
•
264
IN—sets the beginning of the audio region to be copied.
OUT—sets the end of the audio region to be copied.
FROM—sets the location of the region's time anchor.
TO—sets the time location at which you want to paste the time anchor.
IN
FROM
IN
FROM
IN
FROM
Off—so that the copied audio is pasted over any audio already present at the
destination location.
On—so that the copied audio is inserted at the TO point, moving all subsequent
audio on the track to the end of the pasted copy, or copies.
www.Roland.com
Before COPY
OUT
TO
COPY with +Insert off
OUT
TO
COPY with +Insert On
OUT
TO
Roland VS-2000 Owner's Manual