Troubleshooting; Error & Status Messages On The Display Panel - Ricoh C2408 Operating Instructions Manual

Error & Status Messages on the Display
Panel
❖ ❖ ❖ ❖ Status Messages
Messages/Second messages
Hex Dump Mode
Offline
Please Wait
Printing...
Ready
Resetting Job...
Waiting...
❖ ❖ ❖ ❖ Alert Messages
Messages/Second messages
Close duplex unit cover.
Close ### cover
Collate has been cancelled.
DIMM has a problem.

4. Troubleshooting

The machine receives data in hexadecimal numbers in Hex
Dump mode. Turn off the machine after printing, and then
turn back on.
The machine is offline. Set the machine online by pressing
[Online] on the display panel to start printing.
The machine is initializing the development unit. Wait for a
while.
The machine is making prints. Wait for a while.
The default ready message. The machine is ready for use. No
action is required.
The machine is resetting the print job. Wait until "Ready" ap-
pears on the display panel.
The machine is waiting for the next data to print. Wait for a
while.
Description
The cover of the duplex unit is
open.
The cover of the indicated pa-
per tray is open.
Note
❒ "###" in the message rep-
resents a paper feed tray.
The collate print function has
been canceled.
An error has occurred in the
DIMM inside the machine.
Status
Solution
Close the cover of the duplex
unit.
Close the cover of a paper feed
tray.
Increase memory capacity.
When adding a memory mod-
ule to the machine, contact
your sales or service represen-
tative.
Contact your sales or service
representative.
27