Error Messages On The Display; Messages Without Code Numbers - Ricoh Laser Printers Network Manual

Error Messages on the Display

This section explains the most common network-related messages that appear
on the display. If a message not shown here appears, follow its instructions.

Messages without Code Numbers

Message
hCannot connect to network
Check IP Address
hCannot connect to network
Contact key operator
Ethernet Board Error
hServer communicat. failed
Contact key operator
Reference
Before turning the main power off, see "Turning On the Power", Copy Ref-
erence.
Causes
Network connection could
not be established.
Network connection could
not be established.
An Ethernet board error has
occurred.
Cannot communicate with the
server.
Error Messages on the Display
Solutions
Check the machine's IP ad-
dress.
Check the network. If this
message continues to appear,
contact your key operator.
Turn off the main power
switch, wait a few seconds,
and then turn it back on. If this
message continues to appear,
contact your sales or service
representative.
Check the server. If this mes-
sage continues to appear, con-
tact your key operator.
7
25