Omron SYSDRIVE 3G3MV SERIES User Manual page 321

List of Parameters
Para Reg- Name
me- ister
ter No.
No. (Hex)
n066 0142 Multi-func-
tion analog
output
n067 0143 Multi-func-
tion analog
output gain
n068 0144 Multi-func-
tion analog
voltage
input gain
n069 0145 Multi-func-
tion analog
voltage
input bias
n070 0146 Multi-func-
tion analog
voltage
input filter
time con-
stant
n071 0147 Multi-func-
tion analog
current
input gain
n072 0148 Multi-func-
tion analog
current
input bias
n073 0149 Multi-func-
tion analog
current
input filter
time con-
stant
Description
Selects the monitor item with n065 set to 0.
0: Output frequency (with 10-V output at max.
frequency)
1: Output current (with 10-V output with
Inverter rated output current)
2: Main circuit DC voltage (with 10-V output at
400 [800] V DC)
3: Vector operation torque monitor (with 10-V
output at rated motor torque)
4: Output power (with 10-V output at power
equivalent to max. applicable motor capac-
ity) Cannot be monitored in vector control
mode.
5: Output voltage (with 10-V output at
200 [400] V AC)
* Values in ( ) apply with n067 set to 1.00.
* Values in [ ] are for 400-V models.
Used to set the output characteristics of multi-
function analog output.
Sets the input characteristics of multi-function
analog voltage input.
Gain:Sets the frequency of maximum analog
input (10 V) in percentage based on the input (10 V) in percentage based on the
maximum frequency as 100%.
Bias: Sets the frequency of minimum analog
input (0 V) in percentage based on the
maximum frequency as 100%.
Sets a primary lag digital filter for multi-function
analog voltage input.
Sets the input characteristics of multi-function
analog current input.
Gain:Sets the frequency of maximum analog
input (20 mA) in percentage based on the input (20 mA) in percentage based on the
maximum frequency as 100%.
Bias: Sets the frequency of minimum analog
input (4 mA) in percentage based on the
maximum frequency as 100%.
Sets a primary delay digital filter for multi-func-
tion analog current input.
Chapter 10
Set- Unit Defaul Chan-
ting of t set- ges dur-
range set- ting
ting opera-
0 to 5 1 0 No
0.00 0.01 1.00 Yes
to
2.00
–255 1% 100 Yes
to 255
–100 1% 0 Yes
to 100
0.00 0.01 s 0.10 Yes
to
2.00
–255 1% 100 Yes
to 255
–100 1% 0 Yes
to 100
0.00 0.01 s 0.10 Yes
to
2.00
Ref-
er-
ing ence
page
tion
5-38
5-38
5-16
5-16
5-17
5-16
5-16
5-17
10-19