Omron SYSDRIVE 3G3MV SERIES User Manual page 314

List of Parameters
Para Reg- Name
me- ister
ter No.
No. (Hex)
Note Inverter overheating warning (setting value: 26) can be set for 5.5-kW and 7.5-kW Inverters only.
10-12
Description
19 Emergency The Inverter stops
according to the set-
stop fault
(NO) ting in n005 for inter-
ruption mode selection
with the emergency
stop input turned ON
stop input turned ON.
20 Emergency
NO: Emergency stop
stop warn-
with the contact
ing (NO)
closed.
NC: Emergency stop
with the contact with the contact
21 Emergency
opened.
stop fault
Fault: Fault output is
(NC)
ON and reset with
RESET input. Warning
output is ON (no reset output is ON (no reset
required).
22 Emergency
stop warn-
"STP" is displayed (lit
ing (NC)
with fault input ON and
flashes with alarm
input ON)
23 PID control ON: PID control dis-
cancel abled.
24 PID control ON: Integral value
integral reset.
reset
25 PID control ON: Keeps integral
integral value on hold.
hold
26 Inverter ON: Displays inverter
(See overheating overheating warning
note) warning (oH3).
Chapter 10
Set- Unit Default Chan-
ting of setting ges dur-
range set-
ting opera-
Ref-
er-
ing ence
page
tion