All Count Reset - Konica Minolta 7085 Instruction Manual

[4] E.K.C. (Electronic Key Counter) Function Setting (continued)
[2] E.K.C. All Count Reset
Reset the count for all EKC accounts.
EKC Setting Menu Screen
Procedure
1 Touch [4] E.K.C. function setting on the Key Operator Mode Screen. Enter an 8-digit
EKC master key code, then touch OK to display the EKC Setting Menu Screen.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid
8-digit code.
2 Touch [2] E.K.C. all count reset. The EKC All Count Reset Screen will be displayed.
3 Touch YES to reset all counters to zero and to return to the EKC Setting Menu Screen.
Or, touch NO to cancel. Touching PREVIOUS SCREEN will also cancel this function
and return to the EKC Setting Menu Screen.
4 If other EKC setting changes are required, touch desired key, from [1]~[3].
5 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
13-20
EKC All Count Reset Screen