Copying Non-Standard Size Originals (Original Form); C Opying Non-Standard Size Originals (Original Form) - Konica Minolta 7085 Instruction Manual

Copying Non-Standard Size Originals (Original Form)

The copier usually detects the standard size of originals fed through RADF or
positioned on the platen glass (STD size mode).
Use Non STD size mode to specify the scanning area manually for copying or printing
special size originals. Use Tab paper mode to copy a tabbed original, including the
image of the tab part, onto tabbed copy paper.
>>>Specifications for Original Form<<<
❒ Tab extension width: 12.5 mm or less
❒ Incompatible with Non STD Size: Mixed Original, Z-Folded Original, Tab Paper,
Storing image in Overlay Memory
❒ Incompatible with FULL AREA: Combination, Booklet, Dual Page, Non-Image Area
Erase, Image Shift
❒ Incompatible with Tab Paper: Mixed Original, Z-Folded Original, Non STD Size,
Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP Interleave, Image
Insert, Dual Page, Storing image in Overlay Memory
1.
Touch SPECIAL ORIGINAL on the Basic Screen.
The Special Original popup menu will be displayed.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Non STD Size or Tab paper.
The popup menu will appear for Non STD size or Tab paper size setting.
3.
Touch the desired size key.
When selecting FULL AREA on the Non STD size mode menu, the copier
scans the whole area of the platen glass and copies with the paper size or
magnification ratio currently selected.
8-12
Reminder!
DETAILS