Konica Minolta 7085 Instruction Manual page 372

No. 34: Sound (No paper, toner/ JAM)
No. 35: Reserve copy function
No. 36: Scan stop by a pull out tray
No. 37: Change page no. pos. (booklet)
No. 38: Trimmer (STD/ Non STD size)
No. 39: Timer which prohibits Print
No. 40: Bookmark function
No. 41: Delete of overlay image
No. 42: Orig. direction/binding mode
No. 43: Image stored cont. (SRV)
No. 44: Image recalled cont. (SRV)
No. 45: Exit direction
Key Operator Mode Screen
Procedure
1 Touch [13] Memory switch setting on the Key Operator Mode Screen to display the
Memory Switch Setting Screen.
2 Use the procedure below to select the desired item and change the setting.
(1) Touch the arrow keys
select the desired item.
(2) Touch the arrow keys
(3) Touch Change Setting Contents to change the setting of the highlighted item.
(4) Repeat above steps (1) to (3) to make several changes in succession.
3 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
4 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
The following functions can be provided by the Memory switch settings.
[1] Auto reset timer
Set the reset interval starting from the completion of a copying job until the machine
returns to the initial condition.
[2] AUTO RESET key function
Set the condition of the following modes when [AUTO RESET] is pressed: Copy mode,
Copy density, Magnification, Tray selection.
13-40
[13] Memory Switch Setting (continued)
OFF / 3 seconds / 5 seconds / 10 seconds
Reserve copy by folder select / Reserve copy
by original set
ON / OFF
OFF / ON (Outside page numbering)
STD size / Non STD size
OFF / 15 seconds / 30 seconds / 60 seconds /
90 seconds
ON (It is cancel every JOB) / ON (It is not
cancel every JOB) / OFF
Permission (Delete/Overwrite) / Prohibition
(Delete/Overwrite)
It is cancel every job / It is not cancel
OFF / ON
OFF / ON
Face down / Face up
Memory Switch Setting Screen
and at the right on the Memory Switch Setting Screen to
and at the lower left to scroll the screen.