Konica Minolta 7085 Instruction Manual page 86

Making Single-Sided Copies from Double-Sided Originals (2 1)
4.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
5.
Position originals FACE UP in the document feeder according to the
original direction specified in step 2.
• See p. 3-2 to p. 3-6 for details on positioning originals.
• Use RADF store mode (p. 3-32 to p. 3-33) when the original count
6.
Press [START].
The machine starts to scan originals, then prints simplex copies when ready for output.
Press [STOP] to suspend the scanning or printing job.
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
3-28
HINT
HINTS
exceeds 100.
CAUTION