Konica Minolta 7085 Instruction Manual page 375

[31] Exit direction of 1 sheet
Select to exit face up or face down when making only 1 sheet of copy.
[32] An interruption suspended way
Select the timing to stop the job in progress when [INTERRUPT] is pressed.
[33] E.K.C. password input timing
Set the input timing for the EKC password.
[34] Sound (No paper/JAM)
Select the duration of the buzzer for alerting that the machine has stopped being out of
paper or due to paper misfeed.
[35] Reserve copy function
Set the selection for the reserve job setting.
[36] Scan stop by a pull out tray
Select to stop or continue the scanning job when a tray is pulled out.
[37] Change page no. pos. (booklet)
Set the machine to position the page numbers automatically on the outside edges of
the copy when using Booklet with Page Numbering in Stamp.
[38] Trimmer (STD/ Non STD size) (Function invalid)
Set the machine to allow trimming the folded or stapled & folded sheets in non-standard
size (or wide size).
[39] Timer which prohibits Print
Set the timer to allow the printing job after operating the copying job.
[40] Bookmark function
Select to set the Bookmark function only for the current job, set for all the following jobs,
or deactivate the function.
[41] Delete of overlay image
In Overlay Memory setting, select to permit or prohibit deleting the selected image data
previously stored in HDD, and also overwriting the data of the same name when storing
new data in HDD.
[42] Orig. direction/binding mode
Select to reset or save the original direction and bind position settings made on the
Special Original popup menu and Output Mode popup menu after completion of each
copying job.
[43] Image stored cont. (SRV)
When storing the image data in HDD/PC in scan/server mode, select to release or
continue the scan/server mode after completion of each image data storing job.
[13] Memory Switch Setting (continued)
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.K.C.
Lock/Delete
Job Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Power Save
Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Centre
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Scan
Transmission
Non-Image
Area Erase
Timing
Adjustment
Centring
Adjustment
13
Key Operator
Mode
13-43