Stamp - Konica Minolta 7085 Instruction Manual

Printing Watermark onto Copies (Stamp) (continued)
3.
Touch WATERMARK or WATERMARK NUMBERING, as desired.
The subsequent screen will be displayed to allow you to specify the selected
watermark type.
4.
When selecting WATERMARK: Specify the desired watermark type
and density.
Touch to highlight the desired watermark key and density key on the screen. If fine
adjustment of the centred watermark position is required, touch FINE ADJ. OF POSI-
TION to display the Fine Adjustment Setting Screen. See p. 9-54 for details.
When selecting WATERMARK NUMBERING: Specify the desired
watermark numbering type, density, character size and starting No.
Touch to highlight the desired watermark key and density key on the screen.
Touch CHARACTER SIZE to select 20pt or 36pt.
Touch STARTING No. to designate the starting number, if required. See p. 9-54 for
details.
5.
Touch OK.
The Stamp/Overlay Selection Screen will be restored.
Touch to select another stamp function key to use in combination, if desired.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift

Stamp

Overlay
Overlay
Memory
9-57