Konica Minolta 7085 Instruction Manual page 285

Operating Image Data Stored in HDD (HDD Job Information) (continued)
DETAILS
If incorrect EKC password is entered, the print job cannot be completed
successfully and the message displayed in the "Result of job print" dialogue
box will inform you that the wrong password was entered.
See p. 13-15 for details of the EKC setting.
Selecting Auto output:
Enter the desired print quantity, then click on [Apply].
The machine starts to output the specified number of copied sets, then the "Result of
job print" dialogue box will appear when completed.
DETAILS
The web browser does not allow you to cease the printing job.
Operate the machine to stop printing.
Selecting Proof output:
Enter the desired print quantity, then click on [Apply].
A sample copy will be output and the Check Screen will be displayed on the touch
screen of the machine.
Check the sample copy, change the copy conditions if required, then press [START] on
the control panel of the machine to output the rest except the sample set.
The "Result of job print" dialogue box will appear when print job is completed.
Selecting Wait output:
Enter the desired print quantity, then click on [Apply].
The image data will be recalled but held to be output, then the Basic Screen will be
displayed on the touch screen of the machine.
Select the desired copy conditions and enter the desired print quantity, then press
[START] on the machine control panel.
Choosing [Back] will resume the Job list dialogue box.
DETAILS
When selecting Auto output or Proof output, only the web browser setting
allows the print quantity to be specified.
When selecting Wait output, the print quantity entered in the web browser
can be changed on the machine control panel before pressing [START].
HINT
Server
Functions
Image
Store/Delete
Image
Store&Output
Image Recall
Image Edit
To Use Web
Utilities
Machine
Information
Job Status
HDD Job
Information
Environment
Setup
10
Network
Function
10-31