Konica Minolta 7085 Instruction Manual page 202

Making a Multiple Page Signature Booklet (Booklet) (continued)
4.
Touch to highlight the desired Booklet mode key.
When a cover sheet is required, touch CHANGE COVERS TRAY to select the cover
sheet tray source.
Touch CHANGE OUTPUT MODE is you want to change the output order.
5.
Touch OK.
The Application Selection Screen will be restored.
Select additional Applications, as desired.
Key Operator can set the machine to position the page numbers
automatically on the outside edges of the copy when using Booklet with
Page Numbing in Stamp. See p. 13-39 to p. 13-44.
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
AMS is selected automatically.
7.
Select the tray in which you loaded copy paper in step 1.
To release AMS, select the desired magnification, then select paper size.
8.
Select the 1 2 or 2 2 copy mode.
If the copier is equipped with FS-211 Finisher, Fold or Stitch & Fold output
mode is available. Follow the procedure on p. 9-15 to use the function.
9.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
10.
Position originals FACE UP in the document feeder.
• For details on positioning originals, see p. 3-2 to p. 3-5.
• Use RADF store mode (p. 3-32 to p. 3-33) when the original count
Original pages should be a multiple of 4 in 1-2 mode or a multiple of 2 in 2-2
mode; otherwise blank pages are automatically inserted to the last.
9-14
HINT
DETAILS
HINT
HINTS
exceeds 100.
Reminder!