Konica Minolta 7085 Instruction Manual page 223

Repeating Automatically or Selecting Repeating Times (Repeat:
2.
Touch Repeat on the Application Selection Screen.
The Repeat Mode Selection Screen will be displayed.
3.
Touch to highlight the desired mode key.
Touch AUTO to select the Auto Detection mode.
Touch 2 Repeat, 4 Repeat, or 8 Repeat to select the desired Repeat mode.
4.
Touch OK.
The Application Selection Screen will be restored.
Non-Image Area Erase is automatically selected on the Application
Selection Screen when AUTO mode is selected.
When 2 Repeat mode is selected, Page space function of Image Shift can
be used to make the desired amount of blank space between the two
images on a page. See p. 9-44 to p. 9-46.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.00 (100%) is selected
as a magnification ratio.
• When 2 Repeat, 4 Repeat, or 8 Repeat is selected, the scanning area will
be a portion of the selected paper size equally divided according to the
selected mode.
In this case, magnification ratio will be fixed to 1.00 (100%).
• Copy mode is automatically set to 1 1. When selecting 1 2 mode,
Platen store mode will function automatically.
AUTO/ Repeat Mode) (continued)
DETAILS
HINT
DETAILS
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-35