Making Single-Sided Copies From Double-Sided Originals (2 1); M Aking Single-Sided Copies From Double-Sided Originals (2 1); Finisher - Konica Minolta 7085 Instruction Manual

Making Single-Sided Copies from Double-Sided Originals (2 1)

Use RADF and select 2 1 copy mode to make single-sided copies from double-sided
originals.
2-1 Copying
Double-sided original
1.
Touch 2 1 on the Basic Screen to highlight it.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Select the original set direction.
Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original popup
menu, then touch the desired original direction key to highlight it.
Touch OK to return to the Basic Screen.
3.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
Front
Front
Front
Front
Front
Reminder!
DETAILS
Front Back
Front Back
Front Back
Front Back
Front Back
Simplex copy
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without

Finisher

FS-111/211
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-27