Timer Setting - Konica Minolta 7085 Instruction Manual

[2] Timer Setting

Use this function to set the On/Off times in hours and minutes for each day of the week
or set the block time for the entire week, i.e., the same On/Off time for each day.
Weekly Timer Setting Menu Screen
Procedure
1 Touch [9] Weekly timer on the Key Operator Mode Screen.
Enter your 4-digit Weekly Timer master key code, then touch OK to display the Weekly
Timer Setting Menu Screen.
NOTE:
If an invalid Weekly Timer master key code is entered, continue by entering
the valid 4-digit code.
2 Touch [2] Timer setting to display the Weekly Timer On/Off Time Setting Screen.
3 When the screen is displayed, the ON-time of Monday is always highlighted.
Enter a 2-digit ON-hour (ex. 8 a.m. is 08) and a 2-digit ON-minute (ex. 7 min. is 07)
using the touch screen keypad, and then touch SET.
Touching SET repeatedly will shift the input section from Monday ON, Monday OFF,
Tuesday ON, Tuesday OFF etc.
NOTES:
• If ON-time and OFF-time are the same, power will not go on.
• If the setting is 00:00~00:00, you will not be able to set the copiers off/on
When setting Sunday OFF-time, Monday ON-time is highlighted again. Proceed to step
5.
4 To set the ON/OFF time collectively for more than one day of the week, touch Block
timer setting to display the Weekly Timer On/Off Time Block Setting Screen.
5 When you open this screen, the ON and OFF times are always set at 00:00~00:00.
Touch to highlight the day(s) of the week to be set. More than one can be selected at a
time.
Enter the ON-time and OFF-time using the touch screen keypad, and then touch SET
after each entry.
6 Touch OK on the Weekly Timer On/Off Time Setting Screen or on the Weekly Timer On/
Off Time Block Setting Screen to complete the setting, and return to the Weekly Timer
Setting Menu Screen.
13-30
condition for specific days.
[9] Weekly Timer (continued)
Weekly Timer On/Off Time Setting Screen
Weekly Timer On/Off Time Block Setting Screen