Konica Minolta 7085 Instruction Manual page 170

1.
Turn power on by pressing the Power switches of the two copiers.
Confirm that both copiers are ready to copy with the Basic Screen displayed.
2.
Touch OUTPUT MENU on the Basic Screen of either copier.
The Output Mode popup menu will be displayed.
3.
Touch TANDEM to highlight it, then touch OK.
The copier with TANDEM highlighted will become the primary copier; the other copier
will function as the secondary copier. The Master icon displays on the Basic Screen of
the primary copier to indicate that the two units are ready to work in tandem mode.
The Sub icon will display on the Basic Screen of the secondary copier when
[START] is pressed on the primary copier to start the tandem printing
operation.
The tandem mode cannot be selected/continued in the cases shown below.
The message "Please wait/ Reserve is not available in Sub machine," "Sub
machine error/ Please check sub machine," or "Please check sub machine"
will be displayed, as required.
• The tandem mode cannot be selected while the secondary copier is in the
• Selected tandem mode will be released automatically when the secondary
• When any problem occurs in the secondary copier, such as a paper
7-26
Using Two Copiers in Tandem (continued)
DETAILS
DETAILS
off state, due to Auto shut-off. Press [POWER SAVER ON/OFF] to release
it.
copier activates Auto shut-off. Press [POWER SAVER ON/OFF] to release
it, then select the tandem mode again to restart the procedure.
misfeed or lack of paper, the secondary copier will be unavailable for
printing; however, the problem will not cause tandem mode to be released.
Take the appropriate troubleshooting measures to be ready for copying.