Konica Minolta 7085 Instruction Manual page 260

Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued)
6.
Enter the desired job name in up to 8 characters from the touch
screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each
character, then enter the correct job name.
7.
If the job name is correct, touch OK.
The Scanner Setting Screen will be displayed.
If an entered job name has already been used, the popup menu appears to
ask you whether to rewrite the data or to re-enter new name.
Touch YES to rewrite, or NO to create new name.
8.
Select the desired scanning conditions.
Print quantity cannot be entered.
Store mode is available. Touch STORE to highlight it to use this function.
9.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
See p. 3-2 to p. 3-6 for details on positioning originals.
10.
Press [START] to scan original(s).
When scanning originals is completed, the machine automatically begins storing data in
the HDD. If Store mode is used, touch to deselect STORE on the Scanner Setting
Screen after all originals are scanned, then press [START].
When storing job is almost completed, SCANNER→ HDD icon appears in the
message area, then the Basic Screen will be restored automatically.
10-6
DETAILS
DETAILS
HINT