Konica Minolta 7085 Instruction Manual page 203

Making a Multiple Page Signature Booklet (Booklet) (continued)
When loading originals, heed the following limits on capacity:
Fold mode
Stitch & Fold mode 80 pages or less for simplex copying
Exeeding the above limits on capacity may cause misfeeds in the finisher.
11.
Press [START].
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
When the Booklet / Trimmer unit tray capacity is exceeded, the
finisher / trimmer unit will cease operating. To avoid such
trouble,
specifications on p. 11-3.
The roller drive unit is located inside the Booklet tray of the
finisher. DO NOT put your hand into the roller drive unit when
removing folded or stapled & folded sheets; otherwise, you may
be injured.
1 Touch OUTPUT MENU on the Basic Screen to display the Output Mode
popup menu, then touch MAIN TRAY to highlight it.
2 Touch STITCH & FOLD or FOLD, as desired.
NOTE:
Selecting FOLD or STITCH & FOLD will automatically switch the output
tray to Booklet tray. Notice that the arrow shown beside the Main tray
shifts to the Booklet tray.
3 Touch OK on the Output Mode popup menu. The Basic Screen will be
restored with the OUTPUT MENU highlighted.
Reminder!
12 pages or less for simplex copying
6 pages or less for duplex copying
40 pages or less for duplex copying
CAUTION
select an appropriate print
DETAILS: Selecting Fold / Stitch & Fold Mode
quantity from the
9-15
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory