Konica Minolta 7085 Instruction Manual page 294

Setting E.K.C. Function (Environment Setup) (continued)
To reset E.K.C. count:
(1) Click on the check box(es) to select the E.K.C. data of the counter to be cleared,
then click on the radio button (a white circle) heading the "Reset the count of
selected item(s)."
(2) Click on [Apply]. The Count Reset Confirmation window will be displayed.
Click on [Back] to cancel this procedure and return to the E.K.C. Data List
window.
(3) Click on [Apply] to immediately reset the counters to zero.
If an error message is displayed after clicking on [Apply], a counter has not
been reset due to a machine operation in progress. The machine must be in
an idle state when you click on [Apply].
Click on [Back] to return to the E.K.C. Data List window.
10-40
DETAILS
DETAILS: Error Message