Konica Minolta 7085 Instruction Manual page 105

Output Mode for Machine with Finisher (continued)
To set the output to Secondary (sub) tray, touch SUB TRAY to display the popup
menu, then touch to highlight the desired key(s).
• Face down non-sort exit: FACE DOWN
• Face down group exit: FACE DOWN and GROUP
• Face up non-sort exit: FACE UP
• Face up group exit: FACE UP and GROUP
Touch OK to restore the Basic Screen. OUTPUT MENU will be highlighted, and the
output icon of the selected output mode will be displayed in the output icon area.
6.
Select additional copy conditions, as desired.
7.
Enter the desired print quantity from the control panel keypad.
See p. 11-3~p. 11-4 to be sure that the finisher capacity is not exceeded.
8.
Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
9.
Press [START].
Press [STOP] to suspend the scanning or printing job.
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
HINT
HINT
CAUTION
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-111/211
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-47