Density Shift - Konica Minolta 7085 Instruction Manual

Density Shift

Use this function to shift each of nine density levels to three levels lighter or three levels
darker.
This function can be set to use in combination with AUTO (Text/Photo), Text, Photo and
Increase Contrast modes and the general mode.
1.
Touch SPECIAL ORIGINAL on the Basic Screen.
The Special Original popup menu will be displayed.
2.
Select the desired mode.
(eg.) To set the Text mode, touch Text to highlight it.
3.
Press [P (COUNTER)].
The following message will be displayed.
Density Shift (Text)
2 (0 ~ 5)
4.
Press any key (from 0 to 5) using the keypad to determine the Density
shift.
Entering 6 or above will be ignored.
5.
Touch OK on the Special Original popup menu.
Density shift in the selected enhance mode is determined.
3-20
Selecting Density Level (continued)
Density shift 2
Density shift 3
Density shift 4
Density shift 5
Density shift 0
Density shift 1