Konica Minolta 7085 Instruction Manual page 274

Recalling Image Data from HDD/PC (Image Recall) (continued)
6.
If the desired job name is displayed in the recall list, touch WAIT
OUTPUT, PROOF OUTPUT, or AUTO OUTPUT, as desired.
Follow the procedure on the next page according to the selected output mode key to
complete the image recall and output operation.
Selecting WAIT OUTPUT:
(1) Touch OK. When the data transmission is completed, the Basic Screen will be
displayed reflecting the settings made for that job.
(2) Enter the desired print quantity, then press [START] to print.
Selecting PROOF OUTPUT:
(1) Touch OK. The data transmission
starts with the Basic Screen
restored. When the data
transmission is completed, a
sample copy is output, then the
Check Screen will be displayed.
(2) Check the sample copy, then
change the copy conditions if required.
Enter the desired print quantity, then press [START] to print.
Selecting AUTO OUTPUT:
(1) Touch OK. The popup menu to
enter the print quantity will be
displayed.
(2) Enter the desired print quantity, then
touch OK.
When the data transmission is
completed, the machine
automatically starts to print.
Key Operator can set the machine to return to the Recall Job Selection
Screen when printing job is completed, so that the data recalling can
continue. See p. 13-39 to p. 13-44.
In this case, the Image
Data Recalling Screen will
be displayed while the
data is recalled.
On this screen, touch
CANCEL to suspend
recalling. On the popup
menu displayed, touch
YES to delete the data
recalled to DIMM, or
touch NO to continue. The
data stored in HDD/PC will not be erased by this operation.
10-20
DETAILS