Electronic Key Counter) Function Setting; Tray Auto - Konica Minolta 7085 Instruction Manual

[4] E.K.C. (Electronic Key Counter) Function Setting
This function can only be accessed by the Key Operator after a 8-digit EKC master key
code is entered. The Electronic Key Counter allows you to monitor all copying activity
by controlling EKC password accounts.
This feature can track copier usage for individual users and/or accounts as well as limit
access to the copier to authorized users. Copy quantity limits for specific accounts can
also be set. Use the EKC Key Operator Form provided at the end of this section to
record EKC password information.
The EKC stores up to 1,000 EKC passwords, each of which represents a separate
account that can be used for billing and recordkeeping. The number of users assigned
to each account may depend upon the billing system in operation and the number of
individuals and departments using the copier. When the EKC is activated, copying can
be performed only after a valid EKC password is entered.
Copy quantity and copy limit for each account can be visually confirmed on the screen.
If EKC needs to be activated on your machine, contact your service representative.
The following EKC settings can be made:
[1] E.K.C. data edit:
Change, add, or delete EKC data, and reset the copy count of the individual account.
[2] E.K.C. all count reset:
Clear the copy count for all accounts.
[3] E.K.C. function setting:
Select the EKC function to be on or off, and also set the machine condition when the
copy limit is reached to stop immediately or after a job is completed, or to only display a
warning message.
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.K.C.
Lock/Delete
Job Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment

Tray Auto

Select Setting
Power Save
Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Centre
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Scan
Transmission
Non-Image
Area Erase
Timing
Adjustment
Centring
Adjustment
13
Key Operator
Mode
13-15