Area Erase - Konica Minolta 7085 Instruction Manual

Copying onto Transparent Films (OHP Interleave) (continued)
4.
Touch OHP Interleave on the Application Selection Screen.
5.
Select the desired OHP Interleave mode, then touch OK.
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
• AMS is selected automatically.
To release AMS, select the desired magnification.
• Print quantity is already set to 1. You cannot enter any other quantity.
7.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
For details on positioning originals, see p. 3-2 to p. 3-6.
8.
Press [START].
DETAILS
HINTS
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image

Area Erase

Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-17