Copying Non-Standard Size Originals (Custom Size / Tab Paper) - Konica Minolta BIZHUB PRO 1050E Operator's Manual

Basic Job Settings
6.3.6 Copying Non-Standard Size Originals (Custom Size / Tab
Paper)
The copier usually detects the standard size of originals fed through ADF or
positioned on the original glass (Standard Size mode).
Use Custom Size mode to specify the scanning area manually for copying or
printing special size originals. Load tabbed copy paper in a tray and use Tab
Paper mode to copy a tabbed original, including the image of the tab part,
onto tabbed copy paper.
Using Tab Paper mode with the Auto Image Shift (Tab Print) function enabled
in the User Setting, the standard-sized original having tab part image printed
on the right edge can be printed properly onto tabbed copy paper by being
shifted 12.5 mm to the right side.
!
Details
Refer to "Loading Tabbed Sheets in Tray" on page 4-11 for details on
loading tabbed copy paper in a tray.
Be sure to make the Paper Setting for the tray loaded with tabbed copy
paper. For details refer to "Set Paper Size, Conditions, Air Assist Function
for a Tray" on page 12-19.
Use the User Setting mode to specify whether or not to use the Auto Im-
age Shift (Tab Print) function. For details refer to "02 Each Function Set-
ting" on page 16-23.
Specifications for Custom Size / Tab Paper:
- Use Full area on the Custom Size mode menu for small originals that can-
not be copied in Standard Size mode.
- Tab extension width for tabbed originals: 12.5 mm or less
Tabbed copy paper size and tab extension width can be specified in Pa-
per Setting.
- Using Tab Paper mode with tabbed copy paper loaded in a tray, the
Needless Tab Paper Exit function will function. For details, refer to
ing Tabbed Sheets in Tray" on page 4-11
1
Touch [Original Setting] on the Copy Screen.
The Special Original popup menu will be displayed.
bizhub PRO 1050/1050e
.
6
"Load-
6-21