Copying Non-Standard Size Originals (Custom Size / Tab Paper) - Konica Minolta BIZHUB PRO 1050 Operator's Manual

6
6.2.6 Copying Non-Standard Size Originals (Custom Size / Tab
Paper)
The copier usually detects the standard size of originals fed through ADF or
positioned on the original glass (Standard Size mode).
Use Custom Size mode to specify the scanning area manually for copying or
printing special size originals. Use Tab Paper mode to copy a tabbed origi-
nal, including the image of the tab part, onto tabbed copy paper.
Specifications for Custom Size / Tab Paper:
- Use Full area on the Custom Size mode menu for small originals that can-
not be copied in Standard Size mode.
- Tab extension width for tabbed originals: 12.5 mm or less
Tabbed copy paper size and tab extension width can be specified in Pa-
per Setting.
1
Touch [Original Setting] on the Copy Screen.
The Special Original popup menu will be displayed.
2
Touch [Custom Size] or [Tab Paper].
The popup menu will appear for Custom Size or Tab Paper size setting.
6-18
Basic Job Settings
bizhub PRO 1050