Table of Contents
Advertisement
Teledyne API
5.9.4. TURNING AN ANALOG OUTPUT OVER-RANGE FEATURE
ON/OFF
07275B DCN6418
In its default configuration, a ± 5% over-range is available on each of the T802's
analog outputs. This over-range can be disabled if your recording device is
sensitive to excess voltage or current.
To turn the over-range feature on or off, select the ANALOG I/O
CONFIGURATION submenu (see Section 5.9.3) then press:
T802 Paramagnetic O
2
Analyzer Operation Manual
103
Advertisement
Table of Contents
