Teledyne T802 Operation Manual page 61

Teledyne API
3.4.3.3. SET O SPAN GAS CONCENTRATION
2
Set the expected O span gas concentration. This should be 80% of concentration range for which the
2
analyzer's analog output range is set.
Only appears if either
the optional CO sensor
2
is installed.
The O span concentration value is
2
automatically default to
20.95 %.
If this is not the the concentration of
the span gas being used, toggle
these buttons to set the correct
concentration of the O calibration
2
gas.
07275B DCN6418
T802 Paramagnetic O
SAMPLE RANGE=100.00 %
<TST TST> CAL CALZ CALS
SAMPLE GAS TO CAL:O2
O2 CO2
SAMPLE RANGE TO CAL:RNG1
RNG1 RNG2
O2 M-P CAL RANGE=100.00 %
<TST TST> ZERO SPAN
O2 M-P CAL O2 SPAN CONC:20.95 %
0 2 0 .9
Analyzer Operation Manual
2
O2=XXX.XX
SETUP
ENTR EXIT
ENTR EXIT
O2=XXX.XX
CONC EXIT
5 ENTR EXIT
ENTR accepts the new
setting and returns to
CONCENTRATION
Only appears if the
analyzer is set for
DUAL range mode
EXIT ignores the new
setting and returns to
the previous display.
the
MENU.
59