Teledyne API
3.1.1. VENTILATION CLEARANCE
3.2. INSTRUMENT LAYOUT
3.2.1. FRONT PANEL
07275B DCN6418
Whether the analyzer is set up on a bench or installed into an instrument rack, be
sure to leave sufficient ventilation clearance.
Table 3-1:
Ventilation Clearance
AREA
Back of the instrument
Sides of the instrument
Above and below the instrument
Various rack mount kits are available for this analyzer. See Table 1-1 of this
manual for more information.
Instrument layout shows front panel and display, rear panel connectors, and
internal chassis layout.
Figure 3-1 shows the analyzer's front panel layout, followed by a close-up of the
display screen in Figure 3-2, which is described in Table 3-3. The two USB ports
on the front panel are provided for the connection of peripheral devices:
plug-in mouse (not included) to be used as an alternative to the touchscreen
interface
thumb drive (not included) to download updates to instruction software
(contact TAPI Technical Support for information).
Figure 3-1:
T802 Paramagnetic O
MINIMUM REQUIRED CLEARANCE
4 in.
1 in.
1 in.
Front Panel Layout
Analyzer Operation Manual
2
25