Connecting The Handset; Connecting To The Electrical Power Supply - Olivetti JET-LAB 600@ User Manual

CONNECTING THE HANDSET

1.
Insert the handset cord connector in the appropri-
ate socket on the machine.
2.
Place the handset in its cradle.
I
NSTALLATION
CONNECTING TO THE ELECTRICAL POWER
SUPPLY...
1.
Plug one end of the power supply cable into the
socket provided on the back of the machine.
2.
Plug the other end of the power cable into the wall
power socket.
The machine automatically performs a self-test proce-
dure to check that its components operate properly.
Two messages «RX ON FAX 100%» with the date and
time and «CHECK PRINT HEAD; PRESS RESUME»
will then alternate on the display.
The machine will be connected permanently, ready
to receive and transmit documents 24 hours a day
(fax mode). If you want to switch the machine off,
you must unplug the power cable from the electrical
power supply, because there is no on/off switch on the
fax machine itself.
5