Tv Format Setup (Australian Models); Fm/Am Frequency Step Setup - Integra DTR-50.1 Instruction Manual

First Time Setup—Continued

TV Format Setup (Australian models)

For the onscreen setup menus to display properly, you
must specify the TV system used in your area.
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select "6. Miscella-
neous", and then press [Enter].
The "Miscellaneous" menu appears.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
3 Use the Up and Down [ ]/[ ] but-
tons to select "2. OSD Setup",
and then press [Enter].
The "OSD Setup" menu appears.
6–2. OSD Setup
Immediate Display
Display Position
TV Format
Language
4 Use the Up and Down [ ]/[ ] but-
tons to select "TV Format", and
then use the Left and Right
[ ]/[ ] buttons to select:
Auto: Select this to automatically
detect the TV system from the
video input signals.
NTSC: Select if the TV system in
your area is NTSC.
PAL: Select if the TV system in
your area is PAL.
5
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.

FM/AM Frequency Step Setup

For FM/AM tuning to work properly, you must specify
the FM/AM frequency step used in your area. Note that
when this setting is changed, all radio presets are
deleted.
1
2
On
Bottom
Auto
English
When you've finished, press the
[Setup] button.
The setup menu closes.
Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
Use the Up and Down [ ]/[ ] but-
tons to select "7. Hardware
Setup", and then press [Enter].
The "Hardware Setup" menu appears.
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Network
6. Firmware Update
51