Connecting A Cd Player Or Turntable - Integra DTR-50.1 Instruction Manual

Connecting the AV receiver—Continued

Connecting a CD Player or Turntable

■ CD Player or Turntable (MM) with Built-in Phono Preamp
Step 1:
Choose a connection that matches your CD player ( ,
phono preamp.
• With connection
• To connect the CD player digitally, use connection
use and , or
a b
Connection
a
b
c
When you use
connection , you
b
need to assign the
digital audio input
(see page 49).
■ Turntable (MM) with no Phono Preamp Built-in
The AV receiver's PHONO IN is designed for use with a mov-
ing magnet (MM) type cartridge.
Use an analog audio cable to connect the AV receiver's PHONO
IN L/R jacks to the audio output on your turntable.
Notes:
• If your turntable has a ground wire, connect it to the AV
receiver's GND screw. With some turntables, connecting the
ground wire may produce an audible hum.
If this happens, disconnect it.
• If your turntable has a moving coil (MC) type cartridge,
you'll need a commercially available MC head amp or MC
transformer. Connect your turntable to the head amp or trans-
former, and connect that to the AV receiver's PHONO IN L/R
jacks.
• You can also use a phono equalizer to connect a turntable
with an MC-type cartridge. See your phono equalizer's man-
ual for details.
36
, you can listen to and record audio from your CD player or listen in Zone 2 or Zone 3.
a
and .)
a c
AV receiver
CD IN L/R
DIGITAL COAXIAL IN 2 (VCR/DVR)
DIGITAL OPTICAL IN 2 (CD)
b
IN 2
(VCR/DVR)
COAXIAL
IN
a
L
R OPTICAL
IN 2
CD
(CD)
L R
COAXIAL AUDIO OPTICAL
OUT OUT OUT
, or ). Use connection
a b c
or . (To record or listen in Zone 2 or Zone 3 as well,
b c
Signal flow
⇐
⇐
⇐
c
CD player
for a turntable with a built-in
a
CD or turntable
Analog audio L/R output
Digital coaxial output
Digital optical output
IN
L
R
CD
a
Turntable (MM) with
built-in phono preamp
AUDIO
OUTPUT
L
R
Turntable (MM) with no
phono preamp built-in
L
R
AUDIO
OUTPUT