Integra DTR-50.1 Instruction Manual page 68

Listening to the Radio—Continued
Selecting SIRIUS Satellite Radio
Press the [Receiver] Remote
Remote
controller
Mode button, and then press the
[Tuner] Input Selector button
repeatedly to select "SIRIUS".
If "CHECK SR TUNER" appears on
the display, make sure the SiriusCon-
nect receiver is connected properly. If
"ANTENNA ERROR" appears, make
sure the antenna is connected properly.
Note:
This procedure can also be performed on the AV
receiver. Press the [Tuner] button repeatedly to select
"SIRIUS".
Signing Up for SIRIUS Satellite Radio
Before you can use SIRIUS Satellite Radio, you must
first sign up for an account. You'll need a major credit
card and your SIRIUS Satellite Radio ID, which you can
get from the AV receiver, as explained below, or from the
SiriusConnect Home tuner package.
1
Use the Tuning Up and Down [ ]/
[ ] buttons to select channel 0.
AV receiver
Your SIRIUS Satellite Radio ID num-
ber is displayed. Write it below.
2 To sign up, go to:
http://activate.siriusradio.com
or call: 1-888-539-SIRIUS (7474)
Note:
Your ID is also displayed on the Satellite Radio screen.
See "Positioning the SiriusConnect Home Antenna" on
page 75.
68
Tuning /
ID
Tuner
Enter
Selecting SIRIUS Satellite Radio Channels
There are three ways to select SIRIUS Satellite Radio
channels:
1. Channel Search mode: select any channel.
2. Category Search mode: select channels by cate-
gory.
3. Direct tuning: enter channel number.
■ Channel Search Mode
1 Press the [Tuner] button, and
then press the [Enter] button
Remote
repeatedly to select Channel
controller
Search mode.
2
Use the Up and Down [ ]/[ ] but-
tons to select a channel.
Channel number
You can also use the Left and Right
[ ]/[ ] buttons to select a category.
Receiver
Channel name