Connecting A Tv Or Projector - Integra DTR-50.1 Instruction Manual

Connecting the AV receiver—Continued

Connecting a TV or Projector

See "Connecting Components with HDMI" on page 24 for HDMI connection information.
Step 1: Video Connection
Choose a video connection that matches your TV ( ,
Step 2: Audio Connection
Choose an audio connection that matches your TV ( ,
• With connection , you can listen to and record audio from your TV or listen in Zone 2 or Zone 3.
a
• To enjoy Dolby Digital and DTS, use connection
and , or and
a b a c
Connection
COMPONENT VIDEO MONITOR OUT
A
B
C
a
DIGITAL COAXIAL IN 2 (VCR/DVR)
b
DIGITAL OPTICAL IN 1 (GAME)
c
b
c
COAXIAL
OUT
When you use connection
If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver
Hint!
to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 31 and
33).
A B
a
.)
AV receiver
MONITOR OUT S
MONITOR OUT V
TV/TAPE IN L/R
L R
OPTICAL AUDIO S VIDEO
OUT OUT IN
or , you need to assign the digital audio input (see page 49).
b c
, or ), and then make the connection.
C
, or ), and then make the connection.
b c
or . (To record or listen in Zone 2 or Zone 3 as well, use
b c
Signal flow
⇒
⇒
⇒
⇐
⇐
⇐
a
VIDEO Y P P
B R
IN COMPONENT VIDEO IN
TV, projector, etc.
Component video input
S-Video input
Composite video input
Analog audio L/R output
Digital coaxial output
Digital optical output
A
C
B
TV, projector,
etc.
29