Integra DTR-50.1 Instruction Manual page 78

Listening to the Radio—Continued
When tuned to an RDS station that's broadcasting text information, the text can be displayed.
Displaying Radio Text (RT)
Press the [RT/PTY/TP] button
once.
The RT information scrolls across the
display.
Notes:
• The message " Waiting
receiver waits for the RT information.
• If the message "
No Text Data
no RT information is available.
Finding Stations by Type (PTY)
You can search for radio stations by type.
1
Press the [RT/PTY/TP] button
twice.
The current program type appears on
the display.
2
Use the Preset [ ]/[ ] buttons to
select the type of program you
want.
See the table on page 77.
78
RT/PTY/TP
" may appear while the AV
" appears on the display,
Preset /
RT/PTY/TP Enter
3 To start the search, press [Enter].
The AV receiver searches until it finds
a station of the type you specified, at
which point it stops briefly before con-
tinuing with the search.
4 When a station you want to listen
to is found, press [Enter].
If no stations are found, the message
"Not Found" appears.
Listening to Traffic News (TP)
RT/PTY/TP Enter
You can search for stations that broadcast traffic news.
1
Press the [RT/PTY/TP] button
three times.
If the current radio station is broadcast-
ing TP (Traffic Program), "[TP]" will
appear on the display, and traffic news
will be heard as and when it's broad-
cast. If "TP" without square brackets
appears, this means that the station is
not broadcasting TP.
2 To locate a station that is broad-
casting TP, press [Enter].
The AV receiver searches until it finds
a station that's broadcasting TP.
If no stations are found, the message
"Not Found" appears.